Tipton gun vise

How To Choose The Best Gun Vise?

Finding the right gun vise is not that difficult if you know what to look for. The following guide will show you which features you should look for if you want to find the best gun vise for your firearms.

1. Material

The materials used for the vise’s construction is important because different materials have different advantages and disadvantages.

Plastic – Plastic has the major advantage of being cheap. Plastic vises are usually cheaper than metal ones, and they can be just as versatile and efficient as the metal ones.

Some people say that the major disadvantage of using a plastic vise is that they tend to be lighter than metal ones, but that can be easily overcome by using some lead or sand for increased stability. An advantage of using a plastic vise is that they are usually very adaptable, and you will be able to use the same one for all your weapons, handguns, shotguns, and rifles alike.

A disadvantage of using plastic is that some manufacturers use only a thin layer of material for the vise’s construction, so you will have to be careful when you use it because it won’t be as durable as metal ones. Thin plastic can break easily, so you won’t be able to apply a lot of force when you work at your gun.

Metal – Metal is more expensive than plastic, so it’s only natural for the vises made out of metal to be more expensive than plastic ones.

The main advantage of using a metal constructed vise is that it will be more durable and tougher than plastic. Metal is also better at distributing the vibrations produced by the recoil over its surface, so it will be the better choice if you want to use the vise for sighting your gun.

A disadvantage of using metal is the higher price. Most shooters only use a gun vise when they are cleaning their weapons, and they don’t do this very often. If you’re not a gunsmith, spending a lot on a gun vise might not be the best thing for you.

2. Versatility

Versatility is a very important factor you should consider when you’re buying a gun vise, especially if you own more types of guns. The best gun vises can handle more types of weapons, so you will be able to use one for every gun in your possession, instead of using more.

Rifles And Shotguns – Most gun vises can be used for both rifles and shotguns. They have adjustable parts so they can fit the buttstock of rifles or shotguns alike.

These types of vises can be constructed out of plastic or metal, and the advantage of using them is that they don’t have a lot of moving parts, making them more durable than other models. They are very reliable, and you can use them for cleaning, boresighting, or maintenance.

Rifles, Shotguns, And Handguns – These vises can be used for virtually every weapon in your possession. They can be made out of plastic or metal, and you can use them for maintenance work, repairs, or cleaning.

The main advantage of owning this kind of vise is that you will be able to use it for all your guns, and you won’t have to buy different ones for different types of guns.

A slight disadvantage of using this kind of vises is that they have a lot of moving and adjustable components, and that can lead to many problems and a higher breaking probability.

3. Type

Some vises are good for certain tasks, while others will help you at different ones.

Fixed Vises – Most manufacturers design their vises to be fixed. This allows you to clamp the gun tightly and keep them steady for a long time. When they’re fixed, you can proceed with cleaning them or doing maintenance work without having to worry about them moving.

Most of these vises will keep the gun steady on your workbench even if you apply a lot of pressure or force. They usually have rubber covered legs for increased stability, but some can also be screwed into the workbench.

Rotating Vises – Not a lot of manufacturers produce this design, but it definitely has its advantages.

The main advantage of using a rotating vise is that you will be able to approach the gun from different angles which would not be accessible in a fixed vise. This will allow you to do precise adjustments and maintenance procedures which would normally take a lot of time and elbow grease in just a few moments.

A slight disadvantage is that this kind of vises use more moving parts than fixed models, so they might not be as durable. Another disadvantage is that you won’t be able to apply a lot of force or pressure once the gun is rotated without risking to cause permanent damage to the vise.

Why Use Gun Vise For Sighting?

When using a gun or firearm, you will always view the target and the sights in a straight line. Bullets, however, do not travel in that same line. When you pull the trigger, bullets leave the muzzle at a relatively upward angle and rises to a point when gravity pulls them back in the angle line towards the ground.

Some bullets can even rise higher depending on the distance of your target from the muzzle. It means that if you were shooting at a long distance, obstacles like tree branches and limbs would make it harder for you to hit your target. Sighting in your gun appropriately in these kinds of situations will help you make more shots that are accurate.

Factors To Consider When Choosing The Best Gun Vise

Now that you understand the benefits of a good gun vise, you need to know what factors to consider getting your hands on a quality one.

When you know what to look for, finding a quality vise is not too difficult. Here are some of the features we kept in mind when reviewing the options currently on the market.


Gun vises are made from several materials and sometimes this is the deciding factor between a reliable one that will last or one that will break easily. The two main materials used in their construction are plastic and metal. Here are the advantages and disadvantages of each.

  • A plastic vise is usually more affordable, easier to adjust, and can fit all your firearms. While they can be just as efficient and versatile as metal ones, they do tend to be lighter and not as durable as metal models.
  • A metal vise is more expensive but will normally last longer than a plastic option. It also distributes produced vibrations better which is important if you plan on using the vise for sighting your gun.

No matter your budget, there is a great option on the market for you.

The material you need depends on how often you’ll be working on your guns and how many of them you need to service. If you have several firearms or a gunsmith, we suggest investing a bit more on a sturdier gun vise.

On the other hand, if you won’t be needing it as frequently a plastic vise will do as they are inexpensive and easier to adjust.

As the most important factor when selecting a vise, keep the material in mind prior to purchasing. This will give you the best value for your money! Multi-Functional

Depending on your intended use, there are several different kinds of gun vises to consider that differ in usability, quality, and price.

The best ones are very versatile and fit several types of guns which is great if you possess more than one firearm. Finding a vise that has adjustable parts to fit rifles, shotguns, and handguns is important.

Versatility needs to be considered especially if you own more than one type of gun. Quality gun vises can handle several different types of firearms.

Product details

  • Is Discontinued By Manufacturer


  • Product Dimensions

    33 x 9 x 6 inches; 10.6 Ounces

  • Item model number


  • Department


  • Date First Available

    October 17, 2003

  • Manufacturer


  • ASIN


  • Best Sellers Rank:

    #3,470 in Sports & Outdoors (See Top 100 in Sports & Outdoors

    #8 in Gunsmithing Tools


Customer Reviews:

* Fix for UDP-1061. Average customer reviews has a small extra line on hover
* https://omni-grok.amazon.com/xref/src/appgroup/websiteTemplates/retail/SoftlinesDetailPageAssets/udp-intl-lock/src/legacy.css?indexName=WebsiteTemplates#40
.noUnderline a:hover {
text-decoration: none;

4.6 out of 5 stars

2,635 ratings

P.when(‘A’, ‘ready’).execute(function(A) {
A.declarative(‘acrLink-click-metrics’, ‘click’, { «allowLinkDefault» : true }, function(event){
if(window.ue) {
ue.count(«acrLinkClickCount», (ue.count(«acrLinkClickCount») || 0) + 1);

P.when(‘A’, ‘cf’).execute(function(A) {
A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { «allowLinkDefault» : true }, function(event){
if(window.ue) {
ue.count(«acrStarsLinkWithPopoverClickCount», (ue.count(«acrStarsLinkWithPopoverClickCount») || 0) + 1);

Wrap Up

Not only does the vise help you with cleaning and preparing your guns for storage, but you can also use it for various maintenance tasks, for mounting or taking off different gun accessories, for repairs, or for zeroing on sights or scopes. Gun vises are not very complex, and once you get the hang of using them, you will be able to use them for different purposes, each important in its own way. Probably the most important task you can accomplish with a gun vise is cleaning the bore of your rifle or shotgun, especially after hunting season when you put them in storage. Storing your guns filled with soot and debris from extensive hunting may lead to damage to your bore, sometimes only temporary damage, but other times permanent one.

As you can see, cleaning your guns before putting them in storage is very important, and a gun vise will help you by shortening the cleaning process. Finding the best gun vise for your needs is very important because some vises can perform certain tasks well, while others can’t. If you have more types of rifles, shotguns, and handguns, the best option would be to buy yourself a versatile gun vise, so you can adapt it every time you need to clean a different firearm. A good gun vise will also help you with sighting your firearms, whether you use iron sights, reflex sights, or scopes. In fact, you will be able to zero in all your guns faster using a gun vise, and sometimes the zero will actually be more precise. When you use a gun vise, you make sure that the gun is always in the same exact position, so all you need to do is make small adjustments to the sights or the scope and find the true zero.

Remember! Being tactically well-geared is an important and crucial factor for every passionate and experienced shooter. So, we can help find out what are the top-rated gears & accessories by visiting tacticals.org.

Best Gun Vise Comparison Chart

Caldwell Lead Sled DFT $$$$ 30.2 x 14.4 x 5.5 inches 24 pounds Steel Dual frame design
P3 Ultimate Gun Vise $$$ 25”x18″ Less than 10 pounds Heavy-duty steel construction Designed to accommodate both rifles and pistols
Tipton Best Gun Vise $$ 33 x 8.2 x 5.6 inches Around 10 pounds A central aluminum channel and high-quality, solvent-resistant material Highly adjustable design for maximum versatility
Tipton Gun Vise / First Generation $ 9 x 34 x 11 inches 1.6 ounces Tough, solvent-resistant polymers Rubberized cradle and jaws to protect and grip your gun
Lyman Revolution Gun Vise $$ 19.8 x 9.8 x 9 inches 9.5 pounds Molded plastic Rotates Design
MTM K-Zone Shooting Rest $ 7 x 8 x 6 inches 4 pounds Plastic Low-slung center design

Best Gun Vise – Buying Guide

When buying a gun vise, it is important to find a model with the best quality and performance. If you are shopping around for a gun vise, I recommend that you should look for a gun vise that provides functionality, durability, stability, and value for money. The five models that we have reviewed certainly provides great quality, but there are several other gun vises out there that is worthy of being considered.

Functionality is extremely important when buying a gun vise, especially if you have several rifles in your midst. It is best to use a gun vise that is suitable for all sizes and models of firearms. This way, you can enjoy the flexibility of one model for a variety of use. A gun vise should help you clean up your rifle, which means that you should be able to use it to its maximum capacity.

Another factor that you should consider is the durability of the gun vise. It is important to remember that a gun vise will only go as far as its quality. Buying a gun vise certainly is not cheap, which is why you need to get the best from your chosen model. It is important that you can adjust it without any worries that it might fall apart.

Next, you should consider the stability that the gun vise is able to provide. When buying a gun vise, this is the main thing that you should consider since you would never want a wobbly gun vise because it will make the cleaning process more difficult.

Finally, it is important that a gun vise is able to provide the best value for the money. A cheap gun vise may not last you for a long time, which prevents you from maximizing the value of your purchase.

Buyers’ Guide: What to Consider

Construction Material

There are two type of materials used to make a gun vise. They include; plastic materials and the metallic materials.

Plastic gun vises are light in weight and as much as it may seem not to be a good feature, being light makes them easily portable. Plastic gun vises may seem unsteady during sighting in. to keep them steady; you can easily add some lead or a little sand.

In terms of durability, plastic gun vises may seem less durable, but in a real sense, they are as durable as metallic ones. They are also made with adjustable components, which are attached to them and therefore very flexible in handling any gun sizes regardless of how big they are.

On the other hand, metallic vises are similar and have equivalent features. The only difference is that they are heavier due to the metallic materials and a little bit more expensive because of the same reason.

While on the market, it is therefore easy to decide on what type of gun vise you need in terms of its material.


Versatility is very important when to consider when buying a gun vise. In this case, it means the ability of the gun vise to accommodate a number of guns when sighting in. A good gun vise will be able to handle different types of weapons.

Different people have different preferences in terms of weapons. That determines the type of gun vise you will need in terms of versatility. Gun vises have been made for every category of weapons.

For instance, a certain kind of gun vise can be used for both shotguns and rifles. These kinds of gun vises have made with adjustable parts where the buttstock of these guns (rifles and shotguns) easily fits in during sighting in. These kinds of gun vises are constructed from metal or plastic, and they do not have a lot of rotating or moving parts and in the end very durable.

There are other kinds of gun vises constructed in a way that they can be used for virtually all weapons that you would have in your possession when sighting in. They are advantageous because you will not need to get other gun vises for the variety of weapons in your position.

However, they have a lot of rotating and moving components which can lead to a number of issues like breaking and that reduces their durability.

Vise Types

When you have identified the material and the versatility of the gun vise you need for sighting in, the type of vise is the final factor to consider. There are two types of gun vises. Fixed gun vises and rotating gun vises. Both types are important in different cases.

Manufacturers have however designed most of their gun vises in a fixed way. Fixed vises allow you to tightly clamp your gun. They allow your gun to be steady for a long time when sighting in without worrying about movement. Regardless of the force or pressure you apply on your gun during sighting in, the fixed vises will keep very steady.

They also have legs covered in rubber, which increase stability. Some are even screwed directly to the bench to provide enough stability during sighting in.

For rotating gun vises, they are not so popular. Manufacturers do not produce much of them, but they definitely have their own advantages. The main advantage being that you are able to sight in your gun from different angles. The ability to rotate makes it easy for you to make precise adjustments, which would take a relatively long time during sighting in with a fixed gun vise.

However, from the fact that they use more of moving parts means these models may not be as durable as the fixed gun vises. There is also the risk of causing permanent damage to the vise when you apply a lot of pressure when sighting in.

Best Gun Vise Reviews

1. Tipton Best Gun Vise


Great For Handguns – While most of the gun vises available on the market today are adjustable and can be used for handguns as well, this one is really great for them. The rear clamp support can be turned by 180 degrees to hold the pistol and the side clamps will hold it in place while you work on it.

Excellent Instructions – This gun vise comes with complete and thorough installing and using instructions. If you’re new to gun vises, or you don’t exactly know how to adjust this one for your firearm, the instructions will clarify everything.


Plastic – Some people might consider this plastic gun vise as not very sturdy.

2. P3 Ultimate Gun Vise

securely lock all your firearms


Well-Constructed – The gun vise is not made out of cheap plastic, but it’s made out of hard steel tubing. The long leg levers will allow you to use the vise even in uneven terrain, and thick rubber covers the front support, so it will withstand scratches.

Good Customer Service – Like with all mass-manufactured products, sometimes small faults can be present during the manufacturing or shipping. However, if this happens with this model, you will benefit from great customer service.


Poor Instructions – This gun vise comes with poor instructions, so you might have difficulties assembling it.

3. Tipton Gun Vise / First Generation


Easy Installing – This vise is very easy to assemble and install. Most people will be able to assemble and install it even if they don’t read the installation instructions.

Good Quality – Even if this gun vise is made out of plastic, and not aluminum or other sturdier materials, the quality of the vise is good. This model is rugged and stable, despite its appearance.


Asymmetrical Clamping Action – The butt of the rifle will be pushed off the center of the vise when you clamp it down because of the uneven clamps. You will have to improvise and put some padding on one side of the stock if you want to keep it centered.

4. MTM K-Zone Shooting Rest


Easy Installing – This vise is so easy to assemble and install, even second graders could do it without reading the instructions. All the parts fit together nicely and all the finishes are high-quality.

Durable Construction – The gun vise might be made out of plastic, but the manufacturer has built it to last. Even though it’s lightweight, the plastic has a good rugged feel, and once you fill the frame with lead shot or sand the vise feels more durable than other models made out of metal.


Raising Mechanism Can Be Improved – This gun vise’s raising and lowering mechanism could be improved

5. MTM Gun Vise

The materials it is made of– chemical and solvent resistant polypropylene plastic – ensure the durability of this vise. Don’t worry that your guns’ finish may get damaged – this won’t happen because all parts of the vise that are supposed to touch the firearm are rubberized.


  • Assembling this unit is easy and takes around 10 minutes.
  • You can easily adjust your firearm to the vise by a single clampdown.


If you want to use this vise for pistols, it won’t be able to clamp with enough pressure on the gun to hold it tight. This product is primarily used for long guns.

6. Tetra ProVise Professional Gun Care Vise

You can also use this vise for bore sighting if you make sure that you align the rings well to the base. However, you may need to secure the front rest with either rags or other fillers in such a case.

You need to pay special attention when you assemble the unit. If this is the first time you do this, you may not get the correct cam rotation along the prime circle.


  • The finish of your rifle won’t get scratched thanks to the rubberized parts of this vise.
  • This vise has deserved to be called ‘professional’ as it is one of the most durable products of its kind.


If you clean a right-handed bolt, you will have to reach over the top for the cleaning material.

Product description

Product Description

Tipton best gun Vise 181-181tipton gray gun vise181-181 Tipton best gun Vise features, non-marring contact surfaces, every component adjusts to accommodate different firearms and projects, l-shape center post moves where you need it, stiff solvent resistant nylon stands up to years of hard use. 782-731 the gun vise is the ideal third hand for cleaning and Gunsmithing. It features a rubberized cradle and jaws to protect your firearm, quick release cam action for easy access, molded in compartments for solvents and small parts and solvent resistant plastic.


Part of Tipton’s line of gun-cleaning supplies, this vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance, or gunsmithing, and is easily configurable to handle bolt-action rifles, break-open shotguns, AR-15s, and handguns. A central aluminum channel lets the user move individual components to the ideal position for their firearm. Each individual component then adjusts to the perfect position for secure support. The rear base features two adjustable offset clamps for a tight grip on a wide range of buttstock configurations.

The vise is extremely stiff and made from high-quality, solvent-resistant material that will stand up to years of hard use.

Manufacturer’s Warranty All Battenfeld Technologies products are covered against manufacturing defects for a period of one year from purchase. Defective products may be returned within the warranty period for repair or exchange, at our discretion.

About Battenfeld Technologies Battenfeld Technologies designs, manufactures, and sells a complete line of superb, innovative products for hunters, shooters, reloaders, and gunsmiths.

The 5 Most Frequently Asked Questions

Many people, especially those who haven’t use a gun vise before, have a lot of questions about them. In the following section, we answer the most popular questions about them.

1. Can I Use This Vise To Clean My Rifle?

No matter how they’re advertised, all gun vises can be used for cleaning your guns. It can be considered part and parcel of your cleaning kits and tools. Gun vises facilitate applying oil and lubricant while cleaning guns. This is the main reason people buy gun vises in the first place, so that is why all manufacturers specially design their products with this purpose in mind. However, here are some things you should keep in mind.

Some gun vises are only compatible with certain types of guns, like rifles or shotguns, so if you want to use them to clean your handgun, you won’t be able to. Make sure you read the product instructions, or the other customer reviews to make sure the vise is compatible with your gun.

If your gun is custom made, or if you have certain accessories mounted on it, it might not fit the gun vise-like it should. The simple way to solve this situation is to check the other customer’s reviews or take the accessories off before you use the vise.

2. My Gun Vise Didn’t Come With Installation Instructions. What Should I Do?

You can still assemble and install your gun vise, even though it didn’t come with proper installation instructions. The first thing you should do is to check out the manufacturer’s website because there’s a possibility you’ll find the instructions there. If you don’t, make sure you look for the instructions on Youtube. Sometimes people who had the same problem will upload an explanatory video to help other people.

3. What Is This Gun Vise Made Of?

There is no universal answer to this question. Different gun vise models are made out of different materials, metal or plastic. This should be specified in the product description. If you can’t find the information in the product’s description, check out the customer’s reviews and questions. Chances are, you’ll be able to find the answer there. If you still can’t find out which materials were used for the vise’s construction, you can always contact the manufacturer’s customer service. They should be able to provide accurate information regarding this aspect.

4. How Can I Adapt The Vise For My Handgun?

If your gun vise was delivered with poor instructions, it may be tricky to assemble and install it properly, let alone to make changes and adaptations to fit different kinds of weapons. However, there are several solutions to this problem.

The first thing you should do is check for the solution online. Some gun enthusiasts websites can provide valuable information on how to use different guns and gun accessories. If you don’t find the solution there, make sure you check on Youtube, as well. There are many tutorials and explanatory videos online, and you might be fortunate enough to find the right tutorial there.

Another solution to your problem is contacting customer support. Even though they didn’t ship the instructions manual with the gun vise, they should be able to provide sufficient information to clarify this matter for you.

5. How Do I Use A Gun Vise To Zero My Rifle?

Using a gun vise is a great and precise way of zeroing in your rifle. The first thing you have to do is to make sure your rifle is clamped down right on the vise’s centerline.

After you made sure the rifle is centered, place it facing a target. You will have to take proper aim, so keep in mind to use the vise’s windage and elevation knobs to adjust the rifle’s position. When you consider that the rifle is aiming straight where you want, fire around. See where the bullet hit, and make the necessary adjustments to the sights without moving or altering the vise.


And we have reached the last part of our review…

Based on the buying guide that we have compiled, there was one model that has checked off all our considerations.

The Caldwell Lead Sled DFT is the best gun vise on our books. It provides flexibility of use and it is extremely durable. In addition to this, it provides maximum stability when you clean it, which means that you can handle the rifle safely as you maintain it.

The other four gun vises were also able to provide great quality, but the performance of the Caldwell Lead Sled DFT was a cut above the rest.

We hope that we have provided you with valuable information on how to pick the best gun vise that you can use.

Оцените статью
Рейтинг автора
Материал подготовил
Андрей Измаилов
Наш эксперт
Написано статей
Добавить комментарий